User's Manual
PAGE 7
Favorite features (continued)
ADJUSTABLE VOLUME AND BRIGHTNESS
Volume adjustments allow higher volume sengs for parents who want to hear every lile sound
from baby, like cooing, and lower volume sengs to monitor louder sounds and cries from baby.
Easily adjust the volume based on your preferences and the level of other sounds in the home.
Brightness can be adjusted, as well, to accommodate the level of light in the room. Using the
brightness control feature enables lighter or darker video, depending on room viewing condions.
Use the UP and DOWN arrows to adjust the brightness.
POWER-SAVE MODE
While operang on baery power, the video screen will go to sleep, to conserve baery power.
Audio and sound lights connue to funcon normally. Video sleep mode is not available when
using AC adapter.
VIDEO ON-OFF BUTTON
This buon turns the video mode on from video sleep mode. It is ideal for a quick view of baby in
the middle of the night. To monitor in audio only mode, simply press the VIDEO ON/OFF again to
turn the video screen off.
FAQ
PICTURE BUT NO SOUND
-Power the monitor completely off, remove and re-insert the baery, then turn monitor back on.
-Turn up the volume using Volume Control
-Make sure the camera and handheld monitor unit are paired.
SQUEALING SOUND COMING FROM SPEAKER ON MONITOR
-Move the monitor and camera further away from each other
-Turn the volume down using Volume Control
-Power the monitor completely off, remove and re-insert the baery, then turn the monitor on again.
PICTURE NOT CLEAR
-Posion the monitor closer to the camera, but not adjacent.
-Move the monitor away from other electronic devices, WiFi router, etc.
-Adjust the brightness using Brightness Control
-Test recepon by moving the monitor and/or camera to different locaons
NO PICTURE OR SOUND
-Make sure the camera and handheld monitor unit are paired (see page 5 )
-Make sure the camera and handheld monitor unit are both turned on
-Make sure the AC adapters are plugged in
-Make sure the outlets are working
-Make sure the baery is charged before working as portable mode
-Keep the camera and monitor out of WiFi router (more than 10 feet ) off.
SOUND BUT NO PICTURE
-Press the VIDEO ON/OFF buon once to turn on video mode
-Check to make sure nothing is blocking the camera
-Test recepon by moving the monitor and/or camera to different locaons
-Pair the camera and monitor again