User's Manual

2
1、 Place the dance mat on a flat surface.
2、 Plug the receiver into the console,
3、 Power on the console
4、 Open the battery cover on the Wireless dance mat and insert the 4xAA
Batteries into the battery compartment (Make sure you insert the
batteries the correct way - Observe Polarity markings)
5、 Turn on the dance mat, you will notice the LED on the receiver will start
to flash and then turn stable while well connected
6、 Install the game software and get access into the game interface via
Wii-mote
7、 It’s time to play
Function description
 Low Power Consumption (sleep mode)
In order to save batteries power and prolong batteries life, the wireless dance
mat features a sleep mode if it has not been used for a period of time. There are
2 ways getting into sleeping mode (the LED for connection will be off):
1. If the dance mat has not been paired with the receiver for over 2
minutes, the dance mat will go to sleep automatically,
2. If the dance mat is connected to the console and not used for over 5
minutes it will enter a Sleep Mode
To Exit the Sleep Mode, Press Start button to activate the dance mat, the LED will
then turn on.
 Low Voltage Alert
When the battery power of the dance mat is low, the LED on the dance mat will
begin to flash indicating the current batteries need to be replaced.
WARNING: Please ensure that the batteries are inserted correctly. If they are
inserted incorrectly, it may cause personal injury as well as damage to your
dance mat.
 Force Connection
If there are more than one wireless dance mat working in the one operating
environment, use the Force Connect button to manually connect a dance mat to
its respective receiver.
1. Connect the receiver to your console;
2. Press the FC button on the receiver and you will notice the LED on the
receiver will star to flash quickly;