LW77 User Instructions
Please read the instructions before use: ●The company reserves the right to revise the contents of this notice without prior notice. Under normal circumstances, some functions differ in specific software versions. ●The product should be charged for more than 2 hours before use, but avoid long-term charging in an unattended environment when charging. ●Please attach the magnetic charging cable to the charging port of the bracelet automatically.
1. Apple mobile phones can be downloaded from the App Store; 2. Android phones can be downloaded from Google play store and App Store; 3. Or scan the QR code in the watch to download the APP (compatible: IOS12.0 or above /Android6.0 or above); ●To install the APP, please follow the interface prompts to register and log in, and you need to turn on Bluetooth; ●Select the Bluetooth name LW77 on the APP device interface to bind. After the binding is successful, the BT binding interface pops up on the phone.
●In the dial interface, draw from left to right, Enter the function menu list interface ●In the dial interface, draw from right to left, Enter steps, heart rate, sleep and other interfaces More function introduction: Frequent contacts Adding commonly used contacts through the app, contact information will be synchronized to the watch side, clicking the contact person to dial.
call. Motion data Swipe the touch screen from the right to the left, enter the sports data interface, and check the data of the day: the number of steps, distance, calories. Information After the watch is connected to the mobile app, the newly popped information of the mobile phone will be pushed to the watch end simultaneously. The watch will store multiple pieces of information.
starts to measure, and the measurement is completed in about 30 to 60 seconds. At this time, the measurement value is based on PPG technology measurement. Blood oxygen monitoring Blood oxygen measurement：The red light at the bottom starts to measure, and the measurement is completed in about 30 to 60 seconds. At this time, the measurement value is based on PPG technology measurement.
elliptical machine, baseball, swimming, rowing machine, yoga, free training. Sports record Sports record can view the sports data you have exercised: duration, distance, calories, pace, etc. Alarm clock Find the alarm function in the list and add alarm clock according to the corresponding settings. Weather After the watch is connected to the mobile app, the weather will automatically synchronize to the watch end.
The timer function -After selecting the corresponding time, open the timer, and the timer end the vibration reminder. Music Music function-After connecting the app, open the music player to control the playback of music. Camera After the watch is connected to the phone, turn on the camera, click to take a picture, and the photo will be saved in the phone. Respiratory training Choose the corresponding time and follow the interface to inhale and exhale to achieve the purpose of practice.
Female health Women's Health: APP on the link needs to set the gender to women in the app. According to the prompts of physiological health, the watch will prompt the corresponding state. Dial switch Can be selected for dials, which can be switched by long pressing dial to support push dial (multiple dial built -in watches). Style Menu style: Adjust the menu style selection in the watch settings, and the menu style supports the list style, simple style, and nine grid mode.
System message View information about the Bluetooth name, MAC address, firmware version number and other information of the watch. Restore Factory It is confirmed that the restoration of the factory setting will clear all personal data. Product parameters Please read this manual first to ensure safety and correct use: ● The data of this product is for health management reference only. Please do not serve as medical data. If you find abnormal physical data, you should prevail for hospital testing.
to prevent damage to the watch.The waterproof function is not permanent and effective, and the protection function may decrease due to daily wear. Waterproof level: IP68 Sensor: 3 axis g-sensor Battery capacity: 300mAh Synchronous method: Bluetooth Differential rate: 360*360 Show screen: 1.43TFT Working hours: about 7-10 days Work temperature: -10 ℃ ～ 50 ℃ Packing list: host, charging cable Compatible system: iOS 12.0 or above, Android 6.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits reasonable are designed protection to against provide harmful interference in a residential installation.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • Reorient or relocate the receiving antenna. Increase the separation equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
