LOCATION OE CONTROL {Back panel) TALKING Jack 2. Micro USE charring port 3. Light mode button 4: LED indicator 4. Power button Ch 1 Almach one of the alluvial end of the Miro USB cable tithe US charging port on the back of the speaker, 2. Corine the large end of thi fiction USB charging cable ta our committer or other USE charging device: 3. The Power LED indicator will stay solid RED while charging and Tun off when iris fully charged. 4. Remove the mica USB changing cable when charging is complete.
Flip the power switch on the back of the speakers to the ON position. teach speaker will play a tone when powered on indicating it has power and its Bluetooth LED will rapidly flash BLUE, indicating that the speakers are going to pic to each other. 2A second tone will play from one of the speakers indicating that it Has pared to the main speaker and its Bluetooth LED will slowly flash BLUE The main speaker's Bluetooth LED will continue to rapidly flash BLUE.
1. Make surveyor Bluetooth device subscripts AVDP profile. 2. Tum up the volume conveyor Posthumous device, 3 You may have ta pair the speakers, then re-pie to vor device [refer to the “Pairing the Speakers section of this guide). Make sire the speakers ane timed ON before beginning the paling process, 2 Keep the speakers Bod Bluetooth-stabled device within 3 feet of each other during the paling process.
