User Manual

PBT626 USER MANUAL

1.Location of controls

A：on/off

b.：LED indicator

C. Aux-in port

D：USB charging port

2.Pair the speaker with a bluetooth enabled device

Turn the speaker On,the LED indicator light will quickly blink BLUE.

Keep your bluetooth speaker and bluetooth enabled device within 3feet of each other during the

pairing process,set your mobile phone or other bluetooth enabled device to search for Bluetooth

devices.

When the bluetooth enabled device finds the headphone,select” PBT626” from the list of found

devices.If required,enter the password 0000.Select Ok or Yes to pair with your device.

After a successful registration,the LED indicator light will slowly blink BLUE.

Note: if you would like to connect the speaker to another device,you must unpair the speaker from

the currently paired device first.On your device’s bluetooth settings,select “PBT626”,then select

“unpair”.When the speaker have been unpaired,it automatically goes into pairing mode again.

PAGE 1
PBT626 USER MANUAL 1.Location of controls A：on/off b.：LED indicator C. Aux-in port D：USB charging port 2.Pair the speaker with a bluetooth enabled device Turn the speaker On,the LED indicator light will quickly blink BLUE. Keep your bluetooth speaker and bluetooth enabled device within 3feet of each other during the pairing process,set your mobile phone or other bluetooth enabled device to search for Bluetooth devices.
PAGE 2
3.Aux-in Insert the audio cable into Aux-in port,the device automatically goes into Aux mode 4.Charging the bluetooth speaker Connect the small end of the Micro USB cable to the charging port on the speaker Connect the large end of the Micro USB cable to your computer’s USB port or an AC adaptor(not included). The LED indicator light turns RED when charging.It will turn off when fully charged.