User's Manual

Quick Start Guide
Preparation
Please check if the accessories in the package are well provided
SSSbefore using this device: Smart Translation Machine*1, Data
Cable*1, User Manual *1, Certificate*1, Warranty Card*1. This device
supports wireless network networking mode. Please select the
networking mode according to the current actual use environment.
Wireless network
After the boot up of the device, the wireless network can be
configured through the following steps:
○ Launch “settings” and enter “WIFI” submenu.
○ Toggle on the switch.
○ Select the desirable wireless name (SSID) and input the correct
password if there is.
○ Click “Confirm” to connect.
Charging
When the device is in low-power state, the battery icon on the
Status Bar will turn into an obvious low-power state as well. During
the low-power state, some functions of the device may not work
properly. When the battery state is below the 3.4V, the device will
automatically shut down to protect the data. To boot up require
sufficient charging.
○ Charging with device power off, there will be a charging icon with
current battery state in the center of the screen about 10 seconds
after cable plugged in.
○ Charging with device power on, the battery icon on the right top
will turn into a charging state.
○ When charging complete, a solid battery icon will be presented.
Power On / Off
Power On:
Long press the Power Button till the screen is on. The initialization of
the device may spend some time, please wait a while.
Power off:
Long press the Power Button till a dialog prompted, select “Power
Off” to turn off the device.
Wake up / Sleep
Manually:
○ Sleep the device by short pressing on the Power Button.
○ Wake up the device by short pressing on the Power Button.