Installation Instructions
100mm
140mm
印刷要求:
1.材质:封面157g+105g,四色双面印刷,装订成册
2.尺寸:100x140mm
Network
WIFI IEEE802.11b/g/n(2.4GHz)
2. Install the Smart Life app from the
Apple Store/ Google Play Store,
or via scanning the QR code.
Download and launch
the
Smart Life
Preparation
1. Connect to 2.4GHz Wi-Fi net-
work and turn Bluetooth on.
Wi-Fi 2.4GHz
Wi-Fi 5GHz
3. Register an account and allow
the app to use Bluetooth.
Prepare the Lamp for Connection
② Press the timer button for more than 5s
until the indicator flashes quickly in green.
more than 5s
① Charge and turn on the lamp.
ON OFF
Add the Lamp to Smart Life (via Bluetooth)
① The lamp will appear automatically waiting to be added when
you open the Smart Life App.
You can edit the lamp name and click
“Done”.
Add the Lamp to Smart Life (Manually)
② Or you could add the lamp to Smart Life manually.
Enter 2.4GHz Wi-Fi network name
and password, then tap "Next".
You can edit the lamp name and
click “Done”.
Tap "+" in the upper right corner or
you can also select "Add Device".
Tap "Lighting" and then tap "
Lighting(BLE+Wi-Fi)".
Tunable White
RGB Mode
Scene Mode
① Brightness Control
② Color Temperature Control
③ Slip these area can enter the color selector
① Brightness Control
② Brightness Saturation / Color Control
③ Click to know more details of the device,
or rename the lamp, share it to your families
Note: For the scene modes: Night, Read,
Working and Leisure, their color settings
are fixed and could not be customized.
However, you can customize the color
setting of other scene modes (Soft, Colorful,
Dazzling, and Gorgeous) according to your
requirements.
1
2
3
1
2
3
Click “Go to add”
Select the table lamp
Enter 2.4GHz Wi-Fi network name
and password, then tap "Next".
Wait for adding device
Wait for adding device.
87
1817
109 1211 1413 1615
6
KT-B01MA
Linkklite Smart Lighting Co.,Ltd
4th floor, A3 building, Yangbei industrial park
1st phase, Huangtian, Hangcheng street,
Bao'an district, Shenzhen city, Guangdong
Province. China
RGB Table Lamp
music Sync
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.