User's Manual

Using Guide
Specs Warranty
Step1: Plug one end of the charging cable into
any charging port on the left or right of the
MagBar.
The PITAKA MagBar is warranted for 12 months from the
date of purchase.
The MagBar is warranted to be free defects in materials
and function under regular use for the lifetime of the
product. A defect is defined as an imperfection or flaw
that is produced by a manufacturing error, including
malfunction of wireless charging or surface defect, etc.
This warranty is non-transferable and covers only the
original end-user purchaser. PITAKA will only authorize
the warranty claim if the product was purchased from
the official store or authorized dealer.
MODIFICATION: Any change or modification of this device
will void the warranty
Exclusion
Damages don’t cover those resulting from abuse, not
correctly maintained, alteration or misuse (including
disassemble, drops), abnormal wear and tear, cosmetic
damages that do not affect the functionality.
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received,
including interference that may cause undesired
operation. Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet the general RF
exposure requirement.
FCC ID: 2ARI5-MB1001
Important
Customer Support
Read all instructions and warnings before using this
product. Improper use may result in product damage,
excess heat, toxic fumes, fire or explosion, for which
damages PITAKA is not responsible.
1. In order to achieve the best charging effect, please
place your device at the correct position to charge.
2. This charger is only suitable for indoor use, beware of
rain and exposure.
3. Please use the original charger to charge or other
adapter with output over 30W.
4. Avoid placing metal objects in the working area when
charging, and do not let the charger drop off or put
heavy objects on it.
5. It is recommended to unplug or turn off the power
after charging is completed.
6. Please never connect power supply to your MagBar
with the both sides Type C connectors at the same time.
Improper operation resulting in the malfunction of the
MagBar is the sole responsibility of the purchaser.
Phone：[phone]
E-mail: [e-mail]
Website: www.ipitaka.com
Step 4: Freely attach your everyday carry
essentials on the MagBar, including the keys,
AirPodPal, etc.
Rated Input Voltage
Rated Input Current
Transmission Distance
Transfer Efficiency
Operating Temperature
Storage Temperature
Working Frequency
5V~9V
3A
DC 5V/1A
DC 9V/1.1A
≤ 8mm
75% Max
-10℃~30℃
-20℃~60℃
125KHz
Rated Output Voltage
Rated Output voltage
382mm
11mm
107mm
Step 2: Plug the other end of the charging
cable into the charger.
Step 3: The mobile phone can be wirelessly
charged by being placed on the wireless
charging area.
6 7 8 9 10 11 12
Item Specification
RF Exposure: A distance of 15 cm shall be maintained between the antenna and users, and the
transmitter may not be co‐located with
any other transmitter or antenna.