Users Manual

6. Using Your Dash Cam
1. Auto Power ON/OFF:
①Connect the car charger and Dash Cam by using the charging cable.
②Plug the other end of the car charger to your vehicle's cigarette lighter socket.
③When the car engine is on, dash cam will turns ON and start recording automatically. When the car key is turned to LOCK position, Dash
Cam automatically saves the recording and turns OFF within few seconds.
Note:
Some trucks/car’s 12V cigarette outlet is always HOT, which means it provides constant power even when the car is turned OFF and
LOCKED. If this is the case for your vehicle, then the auto ON/OFF feature will not work. And If you leave the camera continuously recording
when the car is turned off, then it will drain your car/truck’s battery and you might not have enough power to start your car for next time. To
Remedy this situation, you can do one of the two option.
*Hardwire your dash cam to your car’s fuse box with AZDOME’S 2-Lead Auto Trigger Hardwire Kit.
*Change the connection in the fuse box for your 12V outlet to socket which only supplies power when car key is turned to ACC or ON
position.
2. Manual Power ON/OF
• To Manually Turn ON: Press the power button once.
• To Manually Turn OFF: Press and hold the power button for at least 2 seconds.
3.Format The Memory Card
1.Press to enter setting interface.
2.Press / to locate Micro SD card set up, press to enter Micro SD card format.
3.Press / to locate “OK”, press to confirm formatting.
4.Menu Setting
1.Press to enter menu setting.
2.Press / to locate the item you want to set.
3.Press to confirm your setting.
4.Press again to exit menu setting.
Note: Please set the right time before using the dash cam.
5.Playback Mode
Press to shift between Video / Photo / Lock Video playback mode.
5.1Video Playback
1. Press / to select files.
2. Press to delete selected file.