Instruction Manual

Re-Pairing the Earbuds

The AP23

earbuds should pair to each other automatically when it’s turned on. If the

earbuds come un-paired from each other, or only one earbud pairs to your device,

try following these instructions to re-pair:

1. Go to the Bluetooth settings of your Bluetooth enabled device, and ﬁnd the AP23 from

the list. Tap and manually “Forget”

the earbud(s), then turn oﬀ the Bluetooth of

your device.

2. Place the earbuds in the charging case and close the cover of the charging case to turn

them oﬀ, then take them out again to turn them back on.

3. After a moment, the earbuds should automatically be linked to each other, and the LED

indicators on both earbuds will ﬂash.

4. Once earbuds are linked, go to the Bluetooth settings of your Bluetooth enabled device

and select AP23 from the list once again.