AP23 Viper True Wireless Gaming Earbuds Instruction Manual TRUE WIRELESS GAMING EARBUDS
Before You Begin... READ THIS MANUAL CAREFULLY AND SAVE FOR FUTURE REFERENCE Caution To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer-approved batteries, chargers, accessories, and supplies. • THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device. • Do not disassemble, modify, or repair the device. • Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
Location of Controls CHARGING CASE EARBUDS LED indicators Touch Control Charging Contacts TOP (OPENED) LED indicators USB Type-C Charging Port FRONT BACK
Getting Started Charging the case and earbuds via PC or electrical outlet 1. Make sure both earbuds are stored in the charging case, and close the cover of the charging case. Earbuds Charging Case (Opened) Charging Case (Closed) 2. Plug the small connector of the included USB Type-C charging cable into the charging port on the charging case. Plug the other connector into a USB power source, such as a USB port on a computer, or into a 5V USB adapter (not included) and plug into an electrical outlet.
While the case is charging, the LED indicators on the case will flash 3 times repeatedly. The LED indicators on the case will be turned off when the charging case and earbuds are fully charged. LED indicators Flash 3 times repeatedly Charging the earbuds with the charging case You can charge the earbuds with the charging case when the battery of the earbuds are running out while you are using them. 1. Make sure the charging case is charged. Charging Case (Opened) 2.
Turning on/off earbuds To turn on the earbuds: The earbuds will be automatically turned on when you open the charging case. or Press and hold the touch control on both earbuds for 5 seconds to turn them on, and you will hear the prompt “Power on”. To turn off the earbuds: The earbuds will be automatically turned off when you put them in the charging case and close the cover of the charging case.
Playback & adjusting volume Play/pause music or video: Double click the touch control on either earbud to play or pause music or video. Touch Control Volume control: To increase the volume, tap the touch control on the right earbud. To decrease the volume, tap the touch control on the left earbud. Note: You will hear a slight beep when you increase or decrease the volume. You will hear a clear beep when it reaches max or minimum volume.
Re-Pairing the Earbuds The AP23 earbuds should pair to each other automatically when it’s turned on. If the earbuds come un-paired from each other, or only one earbud pairs to your device, try following these instructions to re-pair: 1. Go to the Bluetooth settings of your Bluetooth enabled device, and find the AP23 from the list. Tap and manually “Forget” the earbud(s), then turn off the Bluetooth of your device. 2.
FCC Information This device complies with Part 15 of the FCC Rules. CAUTION: Any changes or modifications not expressly approved could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warranty Information 90-Day Limited Warranty Territory: United States/Canada LIMITED WARRANTY TO ORIGINAL CONSUMER This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows: To obtain warranty service: • Visit our customer support portal: www.customersupport123.
