Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 Model：IX-SW156 Ⅰ. Diagram Note: 3D Left Joystick can be L3 when vertical press; 3D Right Joystick can be R3 when vertical press; Power indicators or channel indicators are LED1, LED2, LED3, LED4 from left to right.
Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 Ⅱ. Overview 1. Support Nintendo Switch Console above 3.0.0. 2.Support SWITCH, PC D_INPUT and PC X_INPUT. 3.Four white color LED channel indicators, LED light mode is allocated by the SWITCH console. 4.One COMMAND button, blue light, support TURBO and MACRO function, TURBO speed:20Hz(Ref). 5.
Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 1. SWITCH console Bluetooth connection Step 1: Entering SWITCH console connecting mode, Step 2: Controller enter into pairing mode by pressing Y+HOME 3s. Four channel indicators will continuous light from top to bottom accordingly.
Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 Ⅴ.Different LED Light on Different Platforms PC XINPUT wired：■■□□ PC DINPUT wired(simulation mode)：□■■□ PC DINPUT wired(digital mode)：■□□□ Switch wired/wireless mode：Auto allocation Ⅵ. Multi-function Button Instruction TURBO Function Instruction 1. Press set button and hold, at the same time press COMMAND button, then it will be set with TURBO function.
Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 1.Button Function Shift Setting Method Step 1: Press COMMAND button and then press L3 button, blue LED flash quickly and enter into setting mode. Step 2: Press shift A button, and then press Y button to be shift. Step 3: Press COMMAND button and L3 button to exit. Blue LED light off. Then press A button will show Y button’s function. Press Y button will show A button’s function. 1.
Switch Double Style Wireless Controller Specification File： Date：2021/2/2 Version：A259 A3 1.3 Will auto exit MACRO settings in 30s when no 16 operations (pressed or released) or time. 1.4 Press COMMAND and - button to exit after settings, then the blue LED will off. 2. Clear MACRO Function (e.g. M1) Step 1: Enter into MACRO function setting mode: Step 2: Press COMMAND button and - button, blue LED light on, then release COMMAND and button.
File： Switch Double Style Wireless Controller Specification NO. Item 1 Rated Voltage 2 Rated Capability 500mAh 3 Internal Impedance ≤180mΩ 4 Charge Limit Voltage 4.20±0.05V 5 Discharge Limit Voltage 3.0±0.05V 6 Overcharge Detection Voltage 4.275±0.025V 7 Overcharge Release Voltage 4.175-0.025V 8 Discharge Limit voltage 3.0±0.05V 9 Over-discharge Detection Voltage 2.95±0.08V 10 Over-discharge Release Voltage 3.05±0.05V 11 Over-current Detection value 2.0±0.
