User's Manual

With integrated antenna switch, RF balun,power amplifier (PA) and low
noise amplifier (LNA), the OPL1000 allows both Wi-Fi and Bluetooth
Smart to minimize PCB design area and external component
requirement.
2. FEATURES
The OPL1000 complies with ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15(US), and ARIB STD-T66 (Japan).
Processors
ARM® Cortex®-M3 Application Processor
ARM® Cortex®-M0 Link Controller
Wi-Fi
802.11b up to 11Mbps
Supports STA mode
WPA/WPA2 security supported
Automatic beacon scanning and discovery
Built-in TCP/IP stack
Integrated dual power amplifiers: low (-2 dBm), high (+10 dBm)
Bluetooth Smart
Compliant with Bluetooth 5.0 BLE specifications with 2Mbps rate