User's Manual
▲Please check whether power adapter has been insert to receiver’s input power jack.
2) There is no image or the image is not clear
▲ Please check camera power adapter has been switched.
▲ Please check if the distance is too long between the camera and receiver (The direct
distance should be within 100m), or if there are any electromagnetism obstruction around
(e.g. steel construction will counteract transmitting signals.)
▲ Please make sure the frequency of the wireless camera is the same as that of receiver.
(Two cameras with the same frequency can not work properly within effective distance,
thus interference will be caused)
▲ Please confirm the receiver antenna has been fixed.
▲ Please keep far away from big copper or iron electromagnetism obstruction. High-power
transmitter in the same frequency and car broadcasting station may also cause interference.
4.Accessories:
AV cable one piece
DC8V/500mA power adapter one piece
Manual one piece
Receiver one set (optional)
FCC WARNING STATEMENT
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.