Installation Instructions

Table Of Contents

Input: 110~240V

USB output: 5V 2A

Wireless output: 5W

Light output(AC Mode): 5W 400-500LM

LED output(Emergency Mode): 1.5W 150LM

Battery Capacity: 5200mAh

Size: 230*185*510mm

Material: ABS+Metal+fabric

Check that the main switch is turned on.

1. Turn on the main switch to light the bulb; turn off the main switch to turn off the bulb.

2. Turn on the side switch, and the emergency LED light will automatically turn on when the power

is cut off; otherwise, the emergency function cannot be used.

3. Turn on the side switch to charge the built-in battery; otherwise, it cannot be charged.

1. USB charging: Plug in the USB charging cable to charge devices such as mobile phones.

2. Wireless charging: Place a mobile phone with wireless charging function in the center of

the wireless charging position to start wireless charging.

Vertical Lamp

Light bulb

lampshade

side switch

Wireless charging area

Main switch

USB charging port

A C

110~240V

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

PAGE 1
. Turn on the main switch to light the bulb; turn off the main switch to turn off the bulb. Check that the main switch is turned on. Input: 110~240V USB output: 5V 2A Wireless output: 5W Light output(AC Mode): 5W 400-500LM 110~240V AC LED output(Emergency Mode): 1.5W 150LM Battery Capacity: 5200mAh Size: 230*185*510mm Material: ABS+Metal+fabric 2. Turn on the side switch, and the emergency LED light will automatically turn on when the power is cut off; otherwise, the emergency function cannot be used.