User's Manual Part 2

Insufficient Wi-Fi
signal strength
Unusual network
configuration
Unknown
encryption method
Firewall
preventing
access
Check distance to router; see if a
computer can connect to the
network in this location
Setup network manually through
Menu> System settings > Network
>Manual settings
Change encryption method on router.
M3+ supports WEP, WPA and WPA2
Check the following ports are open on
the router: UDP and TCP ports 80 and
123; DNS port 53.
Windows shares:ports 135–139 and
445.
Windows Media Player: varies– non-
Microsoft firewalls may require
configuration for UPnP.
'Cannot connect
to network
Solutions
Cause
Problem
Internet connection
down
Firewall preventing
access
Station not
broadcasting,
overloaded or
insufficient
bandwidth.
Station broadcasting
using unknown
codec.
Link out of date.
Check that Internet is working for
a computer connected to the
same network
Check the following ports are open:
UDP and TCP ports 80 and 123;
DNS port 53.
Some Internet radio stations may
require additional ports to be opened.
Try other stations; try listening on
computer via Internet radio portal
website; try later.
' Cannot connect
to Internet
'
Cannot play
particular
Internet radio
station
34 of 35
Power Supply: 12V DC
Dimension (mm): 280W x 105H x 185D
Weight: 2,6 KG
Specifications are subject to change without notice.
15. Technical Specification:
Model: M3+
Type:
Speaker: 2 x 2 ” full range driver 1 x 4” woofer½
Hi-Fi music system
Power: 20W RMS
35 of 35
If you have any questions, problems or suggestions for
improvement, don’t hesitate to write us an email or give us a call.
LEMEGA Technology Co., Ltd
Shenzhen City, GD Province, China
[e-mail]
For more information about other exciting products from
LEMEGA, please visit our website or contact us directly.
www.lemegaaudio.com
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Indoor use only
The distance between user and products should be no less than 20cm