User's Manual

◇
Choose”Confirm the indicator is blinking rapidly”,then “Next”, Wait for the
connection to complete.
3.3 AP network configuration mode
If the default network configuration is not successful, try AP network configuration.
◇
Choose "AP Mode" in the upper right corner.
◇
In the default network configuration mode, quickly press the switch 4 times to enter
the AP network configuration mode, and the red indicator light flashes once every 3
seconds.
◇
Choose”Confirm the indicator is blinking slowly”,then “Next”.
◇
Enter the WiFi password.
◇
Open WiFi settings and connect to hotspot”SmartLife-XXXX”.
◇
Return to the App and continue to add the device, Wait for the connection to complete.