User Manual
Shenzhen Lean Kiosk Systems Co., Ltd
19 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
â– Replace the Intercom
1. Open the kiosk back door and turn off the main power switch.
2. Unplug the power DC head, microphone connector, call button connector, speaker audio cable,
communication network cable, ground cable of the intercom module in turn.
3. Remove the 4-piece M3 stainless steel flange nuts holding the intercom module with the hexagon
socket (size 0.22inch) and then take out the intercom module (asshown in below picture)
â– Replace the Help Button
1. Use a flat screwdriver to remove the connection between the button and the call controller.
2. Loosen and remove the fixing nut of the metal help button with an open spanner 14-17, then the
button body can be removed from the front of the cabinet.
3. When installing the metal help button, it needs to smear a layer of flame-retardant silicone on the
edge of the waterproof ring evenly to prevent water seepage at the edge of the button into the kiosk cabinet.