User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
16 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
Nylon cable ties
Electrical insulation tape
Clean cotton
Alcohol
WD40 rust-inhibiting lubricant
Flame retardant silicone
Flashlight
Goggle
Anti-static nylon gloves
Keys for kiosk front and rear door
Attention:During the maintenance inspection process for the Post Kiosk, the main power switch must
be disconnected. The maintenance operation should be strictly according to the "Electrical Safety Technical
Operation Rules” to prevent electric shock accidents.
Kiosk Key Components Maintenance
■Replace the Computer
1. Open the kiosk back door and turn off the main power switch.
2. Unplug the PC power supply connector of the power terminal, and then unplug the connector of DP
signal cable, serial port cable, USB cable and other signal cables in turn.
3. Loosen the flange nut of M4 with the hexagon socket (specification 0.28inch), remove the sheet metal
layering from PC, and then take out the PC (as shown in picture below)