User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
12 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
▶The default setting of the kiosk computer is "Power on" status before delivery. After the kiosk is switched on,
the computer will start up automatically and the display screen will start up normally.
▶If the computer cannot start up automatically after switch on the kiosk, please double check whether the
power cord of computer is loose or not or press the power-on button as shown in below picture again.
Dehumidifier Configuration Instructions
■Program Setting
1. After switching on the power, the device will start automatically, the display parameters will be
normal and no abnormal noise inside.
2. Adjust the humidity parameter, the measurement parameter of hygrometer accords with the actual
environment demand.
3. Open the program in D-disk of kiosk computer: This PC→Local Disk(D:)→Testing software5 →Test
tool→AParklot→select click Dehumidifier (as following picture shows:) click "open" connection, can be set up
on the operation of the Dehumidifier humidity.