User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
5 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
Installation Guide
Introduction
This Pay-on-Foot Kiosk is a type of intelligent terminal which is used in the intelligent identification
management system of the parking lot. The purpose is to realize 24 hours unattended management payment
of the parking lot for the property management company, and to provide the owners with a more convenient
and efficient way of self-service inquiry and payment. Shenzhen Lean Kiosk Systems CO., LTD is major in
developing and researching the self-service payment system in intelligent parking lot actively for many years
and has obtained very good practical effect to solve many payment problems existed in traditional parking lot.
This article elaborated the specifications and installation instructions of the kiosks, which are helpful for
customer to operate the kiosks properly.
Revision of Installation Guide
Serial No. Date Revision Description
REEF-US-LKS8344A
(Pay-on-Foot Kiosk with Bill Recycler)
REEF-US-LKS8344B
(Pay-on-Foot Kiosk without Bill Recycler)
March 2020 Pay-on-Foot Kiosk installation document
version No. 20.0.1
This installation guide describes the ground installation method of the kiosk cabinet, the access method
of the power supply cable and network cable, the installation method of the internal air conditioner and
dehumidifier drainage pipe. During the installation of the kiosk cabinet, it should be noted that there should be
no water or debris staying or falling into the slots of bill recycler, and credit card reader, otherwise the kiosks
will not be able to work normally.
Attention: This installation guide is for the standard installation order and method. If you have any
questions during the installation, please contact LKS technician.
Installation Procedure
Please evaluate and check the following environmental factors before installing the Pay-on-Foot Kiosk.
Attention
▶ Security : As the overall structure material of the Pay-on-Foot Kiosk cabinet is cold-roll steel sheet and it is
quite heavy, for safety purpose, the kiosks must be installed on the ground with firm concrete horizontal floor
as the installation platform.
▶ Reasonable Location: The installation location should be chosen in a reasonable area, where is easy for
customer to see and operate the kiosks without causing interference to other pedestrians.
▶ Power Supply Description： The input voltage of the kiosk in normal operation is "single-phase 110V AC