User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
15 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
■ Manual Setting
After the power on and the dehumidifier passes the self-check, it will automatically enter the automatic
mode, and the digital tube will show the current temperature and humidity in turn for 2 seconds.When the
humidity reaches the start threshold, it will start automatically (manual/automatic light on) and stop working
(manual/automatic light off) if it is lower than start threshold minus return difference. When the dehumidifier
works continuously for more than 12 hours, it stops for half an hour and runs in turn. When did not reach
∨automatic start up conditions, please press “ " button for more than two seconds to start the
∨dehumidification module manually (manual/automatic lights flashing)? If press “ " button for more than 2
seconds, the dehumidifier stop work (manual/automatic lights) and enter into automatic mode.
When the dehumidifier works continuously for more than 12 hours, the dehumidifier will automatically
switch to automatic mode. When the dehumidifier works normally (the digital tube will be in normal state when
the current temperature and humidity value is displayed in turn), long press "SET/ESC" key to display
" " for more than 3 seconds and enter the address setting after 1 second. Through short press the
"SET/ESC key may in turn into the address Settings, dehumidification start value, dehumidifier, temperature
difference value is SET back, start value, humidity adjusting value, and the condensing temperature state, in
∨the condition of setting by" Sunday afternoon "or" "needed to achieve value. Continue to press the
"SET/ESC" key until the digital tube shows " " to SET the autosave, then automatically return to the
normal state.