User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
12 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
the kiosk.
▶ The default setting of the kiosk computer is "Power on" status before delivery. After the kiosk is switched on,
the computer will start up automatically and the display screen will start up normally.
▶ If the computer cannot start up automatically after switch on the kiosk, please double check whether the
power cord of computer is loose or not or press the power-on button as shown in below picture again.
Configuration of Air Conditioner Temperature Control System
1. After switching on the power, the device will start automatically, the display parameters will be
normal and no abnormal noise inside.
2. Adjust the temperature controller to make sure the measuring parameters of the thermometer meet
the actual environmental requirements.
Attention：The parameters of the air conditioner temperature control system in the kiosk are default
factory values as shown in the following table. If the user needs to change the parameters according to the
actual special environment, the parameters can be set according to the following control panel operation.
Controller Operation Interface