User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
26 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
2. Unplug the power supply cord of the air conditioner, the RJ45 communication network connector, and the control panel
communication cable in turn.
3. Loosen and remove the 12 M4 stainless steel flange nuts that are used to fix the air conditioner mounting bracket with the
hexagon socket (the specification is 0.28inch). (As shown in below picture)
4. Remove the stainless steel M4 combination screw that holds the air conditioner with a cross screwdriver to separate the
metal sheet shelf and air conditioner.
■Replace the Ticket Printer
1. Open the kiosk back door and turn off the main power switch.
2. Unplug the printer USB cable connector, power cable head and paper near end signal cable head.
3. Screw out the two loose nuts on the printer mounting bracket to remove the printer and printer bracket.
4. Remove the 4-piece M4 stainless steel combination screws on the back of the printer holder with a cross screwdriver to
separate the printer from the printer holder (as shown in below picture).