User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
25 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
3. Loosen and remove the 4 M4 stainless steel flange nuts on the scanner mounting bracket with an inner hexagon soft sleeve
(size 0.28inch), remove the scanner and mounting bracket together, then remove the 4 M3 stainless steel combination screws
on the back of the scanner with a cross screwdriver to separate the scanner and mounting bracket (as shown in below picture)
■Replace the Intercom
1. Open the kiosk back door and turn off the main power switch.
2. Unplug the power DC head, microphone connector, call button connector, speaker audio cable, communication network
cable, ground cable of the intercom module in turn.
3. Remove the 4-piece M3 stainless steel flange nuts holding the intercom module with the hexagon socket (size 0.22inch) and
then take out the intercom module (as shown in below picture)
■ Replace the Air Conditioner
1. Open the kiosk back door and turn off the main power switch.