User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
21 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
4. Place the removed 29inch LCD display flat on the operating platform, remove the screen cable and backlit power cord on
the back of LCD display, and remove the M3 combination screw on both sides of the display with a cross screwdriver to
remove the LCD panel (as shown in the figure below)
■ Replace 15 inch Capacitive Touch Screen
1. Remove the LCD display from the kiosk cabinet according to the screen replacement procedure the same as 29inch side
LCD display as mentioned above.
2. Crack the capacitive touch screen attached to the screen frame with a hammer and clean the glass fragments and organic
flame-retardant silicone on the screen frame.
3. After cleaning, apply the organic flame-retardant silicone evenly and fully on the border of the LCD display, and then paste
the good touch screen into the border to ensure the surface and border of the touch screen smooth.
4. The pasted touch screen is fixed with adhesive tape for 12 hours, and the LCD display can be installed after the organic
fire-retardant silicone is completely dried and firm.
Warnings：When replacing capacitive touch screen, maintenance personnel should wear protective
equipment such as protective gloves and goggles to ensure their personal safety.