User Manual

Shenzhen Lean Kiosk Systems Co., Ltd
Contact: Jesmine Zhu;Tel: [phone] ; E-mail: [e-mail] ; Website: www.lkskiosk.com / www.lien.cn;
16 Add: Fu'an Industrial Area, Dayang Road, Fuyong Town, Baoan District, Shenzhen, Guangdong Province, China.
Stock Code
:
870885
■ Dehumidifier Configuration Instructions
▶ Program Setting
1. After switching on the power, the device will start automatically, the display parameters will be normal and no abnormal noise
inside.
2. Adjust the humidity parameter, the measurement parameter of hygrometer accords with the actual environment demand.
3. Open the program in D-disk of kiosk computer: This PC→Local Disk(D:)→Testing software5 →Test tool→AParklot→select
click Dehumidifier (as following picture shows:) click "open" connection, can be set up on the operation of the Dehumidifier
humidity.
■ Manual Setting
After the power on and the dehumidifier passes the self-check, it will automatically enter the automatic mode, and the
digital tube will show the current temperature and humidity in turn for 2 seconds.
When the humidity reaches the start threshold, it will start automatically (manual/automatic light on) and stop working
(manual/automatic light off) if it is lower than start threshold minus return difference. When the dehumidifier works continuously
for more than 12 hours, it stops for half an hour and runs in turn. When did not reach automatic start up conditions, please press
“
∨
" button for more than two seconds to start the dehumidification module manually (manual/automatic lights flashing)? If press
“
∨
" button for more than 2 seconds, the dehumidifier stop work (manual/automatic lights) and enter into automatic mode.
When the dehumidifier works continuously for more than 12 hours, the dehumidifier will automatically switch to automatic
mode. When the dehumidifier works normally (the digital tube will be in normal state when the current temperature and humidity