User's Manual

Hand Cleasing Facial Scan Kiosk User Manual
13
not be selected
⑥Access control. Face, safety helmet, mask, temperature 4 options, default all options, at least 1 option
⑦Offline data storage. If the network is off, the data is saved until there is a network and
⑧Software initialization ((use with caution! Before the equipment leaves the factory, we will set various
parameters and bind our platform well. After initialization, all the Settings of the app will be cleared, and we
cannot connect to our platform. This function is applicable to the customer to build their own platform, bind to
the customer platform, can do this operation.）
⑨Whether to turn on face detection
⑩Whether to upload a face photo
⑪Whether to check the safety helmet
⑫Test whether to wear mask
⑬Whether to take the temperature
⑭Temperature display: Fahrenheit and Celsius, one or the other
⑮Set the temperature alarm value
⑯Temperature check (the function caution! Each hardware of the temperature measuring module has
corresponding hardware characteristics, so it is not guaranteed that the measurement results of all modules
will be consistent. But our equipment will be checked out of the factory, unless there is a significant difference
in the results of customer use. Otherwise, not easy to use)
Note: Function 4 and 9, there are corresponding hints and instructions on the code.
4. User List Interface