User's Manual

Temperature Measurement and Face Recognition Machine User Manual
10
3. Do not place the equipment under the environment of strong ultraviolet ray and direct sunlight. When the
temperature is higher than 30℃, ultraviolet and high temperature irradiation of the screen will accelerate
the deflection of liquid crystal molecules, the screen will accelerate the aging, when the outdoor
temperature is higher than 30℃ to move to the indoor or sunshade treatment
4. When the air temperature is lower than 10°C, the screen may not work properly due to the deflection of
liquid crystal molecules. It is recommended not to use this machine below 10°C.
The recommended ambient temperature of this product is 10-30
℃
and the humidity is
10%-80%.
Part 3: Product Installation Operation Instruction
Installation Guide
Introduction
Temperature measurement, face recognition all-in-one machine is a convenient and fast system for
face recognition + human body temperature measurement, with small size, easy to put, simple
installation, fast detection speed and other characteristics.
Attention
：
This installation guide is to guide the installation according to the standard
installation order and method. If you have any questions or problems during the installation process,
please contact lean technician. TEL
：
4006905904
Installation Step
Please evaluate and check the following environmental factors before installing the temperature
measuring face recognition all-in-one machine
：
Attention
▶
Security
:
As the overall structure of the temperature measurement face recognition machine is
sheet metal, the connection between the bracket and the base must be firmly installed.
▶
Location Reasonable: The installation location should be selected reasonably. The vertical
temperature measuring all-in-one machine is only suitable for indoor environment.
▶
Power Supply: The input voltage of the equipment in normal operation is "single-phase
100v-240v ac voltage"; The power adapter 12V power supply line and network line are connected by the
bottom of the machine bracket.
Machine Installation Instructions
Schematic Diagram of Machine Structure