Instruction Manual

SPECIAL NOTE
1. Only one device can be actively paired at one time
2. After pairing for the first time, your device will connect to the keyboard
automatically when opening the keyboard next time
3. In case of connect failure, delete the pairing record from your device, and
try the above procedures again
POWER SAVING MODE
The keyboard will enter sleep mode after being idle for 15 minutes, To activate
it, press any key and wait for 3 seconds
HOW TO CHARGE IT
1. Use the included USB cable for charging. Connect one end to a USB
charger, and the other to the keyboard
2. In charging, the power indicator will turn red. Generally, it takes
approximately 2 hours for a full charge(USB charger is not included).
TROUBLESHOOTING
If you are unable to connect the kevboard to vour tablet please try the following
1. Starting with a full charge on both devices ensures that process won't be
interrupted by a low battery.
2. Check your tablet's Bluetooth is on
3. Make sure that the keyboard is within the effective Operation distance of 33
feet (10m)
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference