User's Manual

Explanation
Contact other
lamps
With a single touch you can contact all the other
lamps on your Group ID
Change color
You have many colors to choose from with our lamp.
When you hold your finger on the touch button, the
color options will start to cycle through. Just hold
down until you see the color you want and then let
go. The lamp will stay on for another five seconds and
then turn off . Tap again to send the color
Turn lamp off
If for any reason you would like to stop the lamp
shining, you can simply hold down the button for two
seconds, release and the lamp will turn off. Please
note that if your friend touches their friend lamp your
lamp will turn on again, so you don’t have to worry
about missing a message.
Change
Wi-Fi settings
Although you will most likely not need to do this, you
can enter the Wi-Fi configuration mode by touching
the button for about 30 seconds. You will notice the
lamp cycles through all the colors several times, but
eventually it will stay dim red. At this point you can
connect to the Friend lamp Wi-Fi and change the
Wi-Fi settings of the Group ID. This may be useful if
you want to make sure that the lamps are on the same
network if they are not working properly.