User's Manual

Set-up instructions
Turn it on!
Use the included USB cable to connect the lamp to a USB charger or
laptop, and the indicator light will turn blue at this time. Then after a
few seconds, it turns to purple and rotating green in turn, then the
light will go out. At this time you can use your friend lamp. First, you
need to enter the Wi-Fi configuration mode. You can enter the Wi-
Fi configuration mode by touching the button for about 30 seconds.
You will notice that the light has cycled through all the colors several
times, but will eventually remain dark red. At this point, you can
connect to your friend lamp to set up Wi-Fi, and set your own group
ID.
Find the Friend Lamp Wi-Fi
When lamp is red ,connect to the new Wi-Fi network named
“Friend Lamp ********”.