User Manual Thank you for buying your own lamp! This manual includes instructions and help to get you Up and running as soon as possible.
Set-up instructions Turn it on! Use the included USB cable to connect the lamp to a USB charger or laptop, and the indicator light will turn blue at this time. Then after a few seconds, it turns to purple and rotating green in turn, then the light will go out. At this time you can use your friend lamp. First, you need to enter the Wi-Fi configuration mode. You can enter the WiFi configuration mode by touching the button for about 30 seconds.
Press Configure Wi-Fi Once connected to the Wi-Fi, there will be a popup asking you to sign into the Wi-Fi ,Press the popup and it will take you to the sign in page. If there is no popup, please open a web browser on the connected device and enter the following into the address field “ 192.168.4.1 ”, this will take you to the same page. Connect the lamp to you home Wi-Fi Press your Wi-Fi network and enter your Wi-Fi password .
Explanation Contact other lamps With a single touch you can contact all the other lamps on your Group ID You have many colors to choose from with our lamp. When you hold your finger on the touch button, the color options will start to cycle through. Just hold Change color down until you see the color you want and then let go. The lamp will stay on for another five seconds and then turn off .
Color Codes The lamp lets you know what it is doing by showing you any of the following colors: Dim blue - I am turning on and connecting Dim red – I am unable to connect to Wi-Fi and l would like to be set up Dim purple – I am downloading and installing an update, just wait until l am swirling green and ready to go! Swirling green -I am connected and ready to go! Note: 1. This friend lamp can only connect to 2.4Ghz Wi-Fi. 2.
Specifications 16 colors Input Valtage : DC 5V Input Current : 1A-2A Wattage : 3W
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
