User's Manual

Figure 32. Helmet wireless projection

4.6. Data Import and Export

Both the data import and export operations should be performed after

the wired projection of the helmet to the computer.

4.6.1. File viewing

Connect the computer and the helmet through the wired projection ,

and follow the steps below to view the helmet files:

STEP 1: Open the display interface of “QtScrcpy”, switch to the

system homepage interface and click the up arrow in the red box (as

shown in the Figure 27 below) ;

STEP 2: In the next page, click “Setting”;

STEP 3: Select “Connected device” in the setting page;