User's Manual

34
included TYPE-C data cable to connect the computer and the smart
helmet.Open “QtScrcpy” on computer.
Step 3: Click "Refresh Device List" and select the device number of
the specific helmet in the "Device Serial Number" (The device
number of the smart helmet is located inside the battery compartment
cover);
Figure 31. Wired projection setting
Step 4: Click "Start Service", and the helmet display will be shown in
the pop-up window.
Note：Click the return button in the red box as shown in the figure below to return
to the helmet system homepage; or click the Home button to return to the system
homepage.