User's Manual

23
4.3. Controlled by the Smart Watch
4.3.1. Basic operation
The upper key of smart watch is for the power control, you can long
press for power on-off and short press for the screen rest or light. The
down key is for the return operation, you can long press to take the picture
and short press to go back to the previous menu. By clicking the middle of
dial, you can unlock the screen, then swipe left-to-right, you can enter the
main control interface through turning on the “KC Smart Helmet” App.
Figure 16. The button of smart watch
Figure 17. The operation screen of smart watch
4.3.2. Bluetooth connection
Press any module of the “KC Smart Helmet” APP main interface to
enter the Bluetooth interface. Long press the Bluetooth button of the smart
helmet, and click the corresponding content in the red box in the order
shown by the arrow in the figure.18 to complete the pairing with the
helmet. The device ID of the smart helmet can be found inside the battery
compartment cover which can be turn on after power-off.
Upper Key
Down Key