User's Manual

of your device and insert the crystal terminal of the
network cable into the RJ45 socket of the Ethernet
adapter.
2. Tap Settings > More... > Ethernet > Use Ethernet
to turn on the Ethernet function. If you use DHCP on your
router, the system will automatically assign an IP address
and gateway for you. If your router has no DHCP or does
not support DHCP, please follow the steps below to
complete the network settings.
3. Tap Static IP setting > Use Static IP.
4. Input the IP address, Gateway, Netmask, DNS1,
and DNS2, and then tap Save at the upper right corner of
the screen.
Set the Virtual Private Network (VPN)
The VPN can access the internal network resources of
your company via public network. To set the VPN, the IP
address of the server provided by the network manager of
your company is required.
1. Tap Settings > More... > VPN. (Please set up a PIN
or Password for Locked Screen at initial use.)
2. Tap the icon on the upper right corner of the
screen to enter Edit VPN profile to add network. Input
the VPN name, Type and Server address, and then tap
Save.
3. The network set in step 2 will be added to the
network list. Tap this network, input the user name and
password, and then tap Connect.
36