User's Manual

the Ethernet.
1. Connect the Ethernet adapter to the Micro USB port
of your device and insert the crystal terminal of the
network cable into the RJ45 socket of the Ethernet
adapter.
2. Tap Settings > Ethernet > OFF/ON to turn on the
Ethernet function. If you use DHCP on your router, the
system will automatically assign an IP address and
gateway for you. If your router has no DHCP or does not
support DHCP, please follow the steps below to complete
the network settings.
3. Tap Static IP setting > Use Static IP.
4. Input the IP address, gateway, network masks,
DNS1, and DNS2, tap Save at the upper right corner of
the screen.
☆Set the Mobile Traffic Warning
To use the mobile data traffic, please set the traffic
warning to avoid extra expenses incurred by excessive
mobile data traffic.
1. Tap ON on the right of the mobile data to enable the
mobile data traffic.
2. Tap on the right of the option Set mobile data
limit, tap Data usage cycle to select a monthly payment
cycle for the traffic package, long tap the time axis and
drag it leftwards/rightwards to adjust the days of a traffic
cycle, and long tap the traffic limit axis and drag it
upwards/downwards to adjust the traffic warning and
limit.
31
700P21A 中性英文说明书(平板电脑 Rk3066方案)