User's Manual

32
settings first.
Data enabled: enable the mobile data traffic function.
Data roaming: select to allow or disallow the use of
mobile data traffic in roaming state.
Access Point Names: set the mobile data access
point based on the data provided by your mobile
provider.
Use only 2G networks: using 2G networks only will
reduce the data uploading and downloading rates, but
will save the battery loss.
Network operator: manually or automatically search
the network operator.
Connect the Mobile Data Network Card
1. Connect the 3G data network card to the Micro USB
port of your device via an extension cable.
2. Tap Network Operators > Choose automatically.
When the system indicates "Registered on the Network
Successfully", that means the data network card has
been recognized by your device. The network signal icon
of the mobile data network card will appear in the
notification bar.
3. Tap Data enabeled to connect your device to the
Internet.
Note: Some network cards may be incompatible with
or may not be recognized by your device as different
data network card manufacturers and chip manufacturers
may have different standards or drives, so you will have
to replace them.
☆Sound
Set the Volume and Warning tone.
101P11C 中性英文说明书(平板电脑 RK3066方案) 1211024