User's Manual

700P11A Ёᗻ㣅 ᭛䇈 ᯢк( ᵓ⬉㛥 Rk2906 ᮍḜ)
settings first.
Data enabled: enable the mobile data traffic function.
Data roaming: select to allow or disallow the use of
mobile data traffic in roaming state.
Access Point Names: set the mobile data access
point based on the data provided by your mobile provider.
Use only 2G networks: using 2G networks only will
reduce the data uploading and downloading rates, but
will save the battery loss.
Network operator: manually or automatically search
the network operator.
ƿConnect the Mobile Data Network Card
1. Connect the 3G data network card to the mini USB
port of your device via an extension cable.
2. Tap Network Operators > Select automatically.
When the system indicates "Registered on the Network
Successfully", that means the data network card has
been recognized by your device. The network signal icon
of the mobile data network card will appear in the
notification bar.
3. Tap Data enabeled to connect your device to the
Internet.
Note: Some network cards may be incompatible with
or may not be recognized by your device as different data
network card manufacturers and chip manufacturers may
have different standards or drives, so you will have to
replace them.
ƿSet the Mobile Traffic Warning
To use the mobile data traffic, please set the traffic
warning to avoid extra expenses incurred by excessive
mobile data traffic.
28