Trunked POC Portable Two-way Radio Quick Reference Guide Instruction Manual Trunked POC Portable Radio We are very grateful for your purchasing Kirisun brand two-way radio produced by Kirisun Communications Co., Ltd. We believe Kirisun two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of Kirisun two-way radio can meet your demands for reliable communication.
Trunked POC Portable Two-way Radio Quick Reference Guide Contents Safety ........................................................................................................................................... 2 Regulatory ................................................................................................................................... 7 Caring for your product ..............................................................................................................
Trunked POC Portable Two-way Radio Quick Reference Guide Safety Read these safety instructions carefully. It is the responsibility of the person operating the product to ensure that it is operated safely at all times, and that local laws and regulations governing the usage of Radio Frequency (RF) products are observed. Obey all signs and instructions relating to the usage to RF wireless devices It is recommended that you obtain training on how to safely operate this product.
Trunked POC Portable Two-way Radio Quick Reference Guide Exposure to RF energy Kirisun designs and manufactures products to meet strict guidelines and international standards relating to Radio Frequency (RF) energy and the potential health risks associated with using such products. If you have any concerns about potential health risks associated with long term exposure to RF energy, you should obtain advice from your employer.
Trunked POC Portable Two-way Radio Quick Reference Guide Your radio should be used in its normal operating position when hand-held, worn on the body or secured within a cradle. Always ensure that the antenna is pointed away from the body, particularly the eyes. When body-worn, the radio must be secured using Kirisun approved attachments. Always ensure that your radio is operating correctly before entering any environment that has a potential risk to personal safety.
Trunked POC Portable Two-way Radio Quick Reference Guide Important safety notes about the Antenna NEVER touch the antenna when the radio is transmitting, this may cause a minor burn to the skin and may affect the operational range of the antenna. NEVER use your radio if the antenna shows signs for damage. DO NOT handle, hold or swing the radio by its antenna, because this may damage the antenna and the radio. Do not chew the antenna or place it into your mouth.
Trunked POC Portable Two-way Radio Quick Reference Guide The use of non-approved accessories may invalidate any product warranty. If a non-approved accessory is fitted, it may compromise the product safety ratings. Always fit the RAC cover when an accessory is not in use. Safe installation into vehicles Electronic control mechanisms within a vehicle can be affected by the use of RF energy such as ABS and transmission controls.
Trunked POC Portable Two-way Radio Quick Reference Guide Regulatory Kirisun declares that this product is compliant with the essential requirements and other relevant provisions of the European R&TTE directive 1999/5/EC relating to radio and telecommunications terminal equipment and the mutual recognition of their conformity. This product is also compliant with directive 2011/65/EU having been designed and manufactured to the RoHS requirements.
Trunked POC Portable Two-way Radio Quick Reference Guide Caring for your product Your radio does not require regular servicing. Caring for your radio as described in this guide will help maintain the product in good operational condition. Kirisun supplies a range of accessories to protect the radio during use, including a protective cover. Contact Kirisun for more information. Always wear eye protection when using brushes or other tools to remove debris from connectors or other parts of the radio.
Trunked POC Portable Two-way Radio Quick Reference Guide Connectors, controls, buttons and keys 9
Trunked POC Portable Two-way Radio Quick Reference Guide Refer to the illustration for the location of the following connectors, controls, buttons and keys: (1) Programmable side button 1 (2) PTT button (3) Programmable side button 2 (4) Antenna (5) Speaker (6) Top key (7) Channel selector knob (8) Power/Volume knob (9) LED status indicator (10) Microphone (11) Rugged accessory connector (RAC) with cover (screw fixing) Micro USB slot and earphone slot (12) Belt clip accessory (13) Battery (14) Battery lat
Trunked POC Portable Two-way Radio Quick Reference Guide Keys, buttons and knobs overview Power switch / Volume knob To power on, rotate clockwise. To power off, rotate counter-clockwise. To increase the volume, continue rotating clockwise. Rotate counter-clockwise to decrease the volume. Channel knob / Group selector knob Rotate clockwise to change channels / groups. Your service provider may program your radio up to 16 channels with contact groups or persons.
Trunked POC Portable Two-way Radio Quick Reference Guide LED status indicator The LED changes colour to show the operational state of your radio.
Trunked POC Portable Two-way Radio LED Quick Reference Guide Operational State - Wireless signal is poor, so the device cannot register Flashing green slowly - Has successfully registered in the server, enter the standby mode Flashing yellow - In the status of registering to the network； No indication - Radio is in ‘idle’ mode or is powered off. Battery information Your radio is supplied with a Kirisun approved battery to provide optimum performance.
Trunked POC Portable Two-way Radio Quick Reference Guide Warning: Take care when handling and charging batteries. Accidental short-circuiting of the battery electrical circuit (battery radios) by metal objects may cause bodily injury such as a burn. Do not disassemble, mutilate or incinerate the battery. Caution: This radio has been tested and certified using a Kirisun approved battery. Using nonapproved batteries may damage the radio and invalidate any product warranty.
Trunked POC Portable Two-way Radio ° Quick Reference Guide ° <1 months -20 to +55 C (-4 to 131 F) 1 to 3 months -20 to +40 °C (-4 to 104 °F) >3months -20 to +30 °C (-4 to 86 °F) Charging your battery If the battery is new, it is important that it is fully charged before first use. Your radio will sound an audible alert when the battery has less than 15% charge remaining. Typical charging time is approximately 3-4 hours. This may vary depending on the battery and environmental conditions.
Trunked POC Portable Two-way Radio 2) Quick Reference Guide Charging with the micro USB slot at the bottom of the battery Remove the battery from the body of the radio, connect the data/charging cable to the micro USB slot at the bottom of the battery. The LED indicator can show the charging status. 3) Charging with the charger (charger is optional accessory) The charger must be placed onto a flat surface away from flammable materials when charging.
Trunked POC Portable Two-way Radio Charger LED Quick Reference Guide State Solid red Battery is charging. Solid green Battery is fully charged. Standby mode without battery. Flashing yellow Battery is damaged. Contact your service provider or Kirisun. Accessory information Fit the battery Align the battery with the two slots on the back of the radio. Carefully slide the battery forward along the slots until it clicks into place. Remove the battery Ensure the radio is powered off.
Trunked POC Portable Two-way Radio Fit the antenna Ensure the radio is powered off Place the antenna into its receptacle Rotate the antenna clockwise until finger tight. Fit the belt clip Ensure the radio is powered off. Remove the two screws at the back of the radio using a cross-head PH1 screwdriver. Align the screw holes on the belt clip with the mounting holes on the back of the radio. Secure into position using the two screws. Caution: Do not over tighten the screws, this may damage the product.
Trunked POC Portable Two-way Radio Quick Reference Guide Connect the programming cable Open the RAC fist, then plus the data/charging cable into the micro USB slot in the RAC. Fit earphone (earphone is optional accessory) Open the RAC cover first, then plug Kirisun-approved earphone into the slot in the RAC.
Trunked POC Portable Two-way Radio Quick Reference Guide Basic operation Power on/off To power on, rotate the Power/volume knob clockwise. To power off, rotate the Power/volume knob counter-clockwise until the knob clicks. Standby First boot after installed battery, it will take about 50s to register in the server. Then if turn off the power, the radio will get into sleep mode to maintain the minimum power consumption. If turn on again, it will takes just 10 seconds to register.
Trunked POC Portable Two-way Radio Quick Reference Guide Call duration setting To avoid occupy right to speak too long, it provides setting for call duration, Time periods range from 30 to 90 seconds, and can be set in the configuration tool. At the end of the time period, the call will be terminated automatically no matter the calling is finished or not.
Trunked POC Portable Two-way Radio Quick Reference Guide Priority call Allow setting different priorities for each radio.
Trunked POC Portable Two-way Radio Quick Reference Guide Press the programmable button which is programmed to be with “duplex call” function, then enter the duplex call mode, press PTT button to initiate the call, during the duplex call, the members in the call can speak without pressing PTT button *Duplex cal can’t be interrupted Historical call record playback Press the programmable button which is programmed to be with “download the historical call”, then the radio can download and playback the histor
Trunked POC Portable Two-way Radio Quick Reference Guide Remote programming Allow programming the radio via 2G (GPRS) / 3G network by operating in management platform , or via WIFI network by operating in configuration APP in Android phone. WIFI network Support access to WIFI network and open a hotspot for other devices.
Trunked POC Portable Two-way Radio Quick Reference Guide Channel Spacing 2G: 200kHz 3G: 5Mhz (Follow 2G/3G protocol and managed by public telecom operator Operating Temperature -10℃ ~ + 50℃ Storage Temperature -40℃ ~ + 80℃ Power Supply DC 3.
Trunked POC Portable Two-way Radio Battery Life (3600mAh) Quick Reference Guide 2G mode: 22 hrs (GPS on); 25 hrs (GPS off) 3G mode: 15 hrs (GPS on); 16 hrs (GPS off) Transmitter RF Power Output 2G: 2W ± 0.5W 3G: 0.25W ± 0.1W Frequency Stability ±0.1 ppm Audio Distortion 5% (typical) Receiver Frequency Stability ±0.1 ppm Sensitivity 2G: BER < 0.001 when Îor = 1µV; 3G: BER < 0.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following tow conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.
0 0 RF Exposure Information: This product is compliance to IC RF Exposure requirements and refers to IC website https://sms-sgs.ic.gc.ca/eic/site/sms-sgs-prod.nsf/eng/h_00013.html search for IC: 8992A-W60W65 to gain further information include SAR Values. Ce produit est conforme aux exigences d'exposition à RF RF et se réfère au site Web IC Informations sur l'exposition RF: Obtenir d'autres informations incluent les valeurs SAR. Https://sms-sgs.ic.gc.ca/eic/site/sms-sgs-prod.nsf/fra/h_00013.
