TP620 Digital Portable Radio Quick Instruction Manual FCC ID:Q5ETP620 II
Quick Instruction Manual Quick Instruction Manual TP620 Frequency:400-470MHz We are very grateful for your purchasing KIRISUN brand two-way radios produced by Kirisun Communications Co., Ltd. We believe KIRISUN two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of KIRISUN two-way radio can meet your demands for reliable communication.
Quick Instruction Manual Declaration of Conformity CE0700! We, Kirisun Communications Co.,Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science&Industry Park, Nanshan District Shenzhen 518057 P.R.
TP620 Digital Portable Radio Quick Instruction Manual (4) EN 50385:2002 FCC We, Kirisun Communications Co.,Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science&Industry Park, Nanshan District Shenzhen 518057 P.R. China Declare on our sole responsibility that this equipment complies with the FCC Part15 rules These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Instruction Manual connected. ● Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note:” Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” 1.
Quick Instruction Manual In the vehicle with an air bag, do not place the radio in the area over an air bag or in the air bag deployment area. Turn off the radio before entering any area with a potentially explosive atmosphere or blasting caps. Do not operate the radio, disassemble or charge the battery in the potentially flammable and explosive atmosphere (such as gas station, coal gas station, etc.). Do not place the radio under the direct sunlight or near the area with heating devices.
Quick Instruction Manual packing material. If any damage or loss occurs during shipment, please contact your dealer. Item Quantity Antenna 1 Belt Clip 1 Charger 1 Battery 1 Hand Strap 1 Power Adapter 1 Instruction Manual 1 2.
Quick Instruction Manual No Part Name No Part Name 1 LED Indicator 5 Side Button1 2 Power/Volume Switch 6 Side Button2 3 Channel Knob 7 Top Button 4 PTT Button 8 External speaker microphone interface / 6
Quick Instruction Manual Programmable Buttons Authorized Dealer can program the programmable buttons as shortcuts to various radio features. Each button can has two features and can be activated through Long Press or Short Press. Note： Short Press – Pressing and releasing quickly Long press – Pressing and holding for the programmed duration LED Status Indicator The LED indicator shows the operational status of your radio.
Quick Instruction Manual Please refer to the following steps to charge your batter. 1) Plug the adaptor in the rear power jack of the intelligent charger, and plug the adaptor into the suitable AC socket. The three LED lights will flash for about one second and turn green when everything is properly set. 2) Put the battery or the radio with battery into the charger, and please turn off the radio before charging. 3) Make sure the battery is properly attached to the charger.
Quick Instruction Manual Note: . The yellow light flashing indicates abnormality in charging temperature or in the circuit, and the charger will then enter the state of protection. During this state, do not impose charging anymore and take out the battery before unplugging the charger. Please use only the charger and battery provided by Kirisun.
Quick Instruction Manual Charging LED Indicator LED Charging Status Yellow light flashes. Abnormality in charging temperature or in the circuit. The red led lights. The battery is in charging. The green led lights. The battery is full charged or Standby(no load) Installing/Uninstalling the Battery Installing the Battery Press the top of the belt clip, and align the battery with the slots on the back of the radio. Press the battery firmly, and slide upward until the latch snaps into place.
Quick Instruction Manual Uninstalling the Battery For detaching the battery, push downward the battery latch at the radio bottom and then push the battery in the direction of the arrow shown in the picture until the battery is completely detached from the radio.
Quick Instruction Manual Note： Please do not throw the short-circuit battery terminal or battery into fire. Please do not short-circuit the battery terminal or throw the battery into fire. Do not disassemble the battery casing by yourself 3. Basic Operation Powering on/off Turn the power/volume knob clockwise for powering on.
Quick Instruction Manual set an alert tone, the radio will make a beep. Turn the power/volume knob counterclockwise for powering off. Adjusting the Volume To increase the volume, turn the Volume Knob clockwise. To decrease the volume, turn this knob counterclockwise. Selecting a Channel Turn the channel knob to select the channel you need. A sound from the speaker indicates that the valid signal is received.
Quick Instruction Manual Push-To-TALK (PTT) Button The PTT button in the radio’s side (Push To Talk, press to talk), this button have functions below: To initiate a new call; In the talking process, you can call other user of this channel. Operation Steps； Hold the radio vertically 1 inches (2.5 cm) from your mouth. Then press and hold the PTT button and speak clearly into the microphone. Release PTT button to receive. Selecting a Zone A zone is a group of channels.
Quick Instruction Manual A negative alert tone indicates the radio switched from zone 2 to zone 1. Selecting a Radio ChannelProcedure： Once the required zone is programmed (if you have multiple zones in your radio), turn the Channel Selector Knob to select the channel. 4. Making/Receiving a Call Making a Call Hold down the PTT button to initial a call to the default contact which has set for current channel in programming software.
Quick Instruction Manual 5. Other Functions Except making a call and receiving a call, the radio also supports many other functions. These functions need to be programmed before using. You can connect your local dealer to use these functions. Functions Send a Message You can send a quick message by one touch button Radio Enable encode Allows stolen/lost radios to be enabled over the air. Radio Disable encode Allows stolen/lost radios to be disabled over the air.
Quick Instruction Manual instantly assess situation. Digital Encryption Enhance communication security. Emergency Variety emergency calls can be confirmed to maximize employee safety. Scan DTMF Encode Decode A scan helps ensure all relevant calls are heard. and DTMF function can allow users to send a PTT ID or realize kinds of calls. .. 6. Troubleshooting No. 1 Problem Powered-on Failure Causes and Solutions A. The battery may be used up. Charge or change the battery to try again. B.
Quick Instruction Manual C. The power binding post isn’t connected with battery. Re-install it and try again. 2 3 Communication Failure A. The frequency settings may be different from others. Set your TX/RX frequencies to be the same as others. B. The CTCSS/CDCSS signaling maybe different from others. Set your CTCSS/CDCSS signaling to be the same as others. C. Beyond the radio’s coverage area. Your place may be too far from the others. Failed Receiving of Signal A.
Quick Instruction Manual 4 5 19 The LED lights up solid green without any voice received A. Check whether the volume level is at its lowest or not. Increase the volume level and try again. B. Check whether the speaker is broken or not. Change the speaker and try again. Failed CPS Programming A. Wrong wire connection. Check and try again. B. Check if the USB driver is installed or not. Install a USB driver and try again. C.
SAFETYTRAININGINFORMATION Your Kirisun Communications Co., Ltd radio generators RF electromagnetic energy during transmit mode.This radio is designed for and classified as“Occupational Use Only”,meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the“General Population” in an uncontrolled environment.
