User's Manual

ManualsBrandsShenzhen Kirisun Communications ManualsElectronicsFM Handheld Transceiver

2. Press it again to stop the alert.

Back light

Turn on/OFF the back light.

It can be set as: short press: back light, long press OFF.

1. Press and hold on this key, the back light is on,

2. Release it to recover the normal mode.

Rptr/Talkaround

When press the key programmed as Rptr/Talkaround , the next

transmission will be at the same frequency as at which it is received.

It can be set as: short press: Rptr/Talkaround, long press OFF.

1. Press the key once, Rptr/Talkaround will be shown,

2. Press to enter,

3. Press / to select the character you need: e.g.:

Repeater Mode or Talkaround Mode ,

4. Press to confirm.

Instantly select the channel

Shift to the channel you selected instantly, so that you can

communicate at the channel you are used to.

It can be set as: short press: instantly select channel 1, long

press OFF.

1. Press the key once to instantaneously select the channel, e.g.

CHANNEL 15

2. Press again to return.

Call 1, 2, 3, or 4

Press the side button programmed as Call 1, 2, 3, or 4 to transmit the

specified code stored in the contact list. Release Call button, and

speak to the microphone to call with the PTT button still pressed.

It can be set as: short press: Call 1, long press OFF.

1. Press the key once to make a call (within the current channel), and

will quit automatically after the call.

Adjust display contrast

You can adjust the display contrast as per your need.

It can be set as: short press: display contrast, long press OFF.

1. Press the key once, Contrast will be shown,

2. Press / to select the character you need,

3. Press to confirm.

It can be set as: short press: display channel frequency, channel

alias and channel No., long press OFF.

1. Press the key once, display the channel alias, e.g.: CHANNEL 1 ,

2. Press it again, the channel frequency will be shown, e.g.:

401.66500

3. Press it a third time the channel alias will be shown, e.g.: CH 1

It can be set as: short press: Zone, long press OFF.

1. Press the key once, Zone No will be shown,

2. Select zone No. with / ,

3. Press to confirm.

It can be set as: short press: channel lock, long press OFF.

1. Press the key once to perform channel lock, then you can not

choose the channel, CHANNEL 1 will be shown.

Change channel display

Change zone

Set Channel lock

Zone 0