User's Manual

18 19
you can select any scan list. Every scan list can scan any channels in
different zones (16 channels to the most).
Lone working
Press the button set as lone working to start lone working. This mode
is to ensure the safety of the user while using the transceiver
separately.
It can be set as: short press : lone working, long press OFF.
1. Press the programmable key once to start lone working;
2. Press once again to quit.
Notes:
The lone working is connected with the automotive checking in the
programming software, and will be effective when both are set.
Contact list
Enter the Contact list quickly:
It can be set as: short press: contact list, long press OFF.
1. Press the programmable key once to enter the contact list Call
2. Press again to enter the content interface of the contact list,
3. Select the options in the contact list with /
4. Press PTT to transmit
5. Press to quit.
Power select
Rotate the channel selector to enter the power level menu
quickly. There are high, middle and low levels.
It can be set as: short press: power select, long press OFF.
1. Press the programmable key once, Zone 0 L will be shown,
CHANNEL 1
2. Press it again, Zone 0 M will be shown,
CHANNEL 1
BCL carry
BCL carryPL
P
2
P
3
P
4
3. Press it a third time Zone 0 H will be shown.
CHANNEL 1
Busy Channel Lockout (BCL)
Busy Channel Lockout can prevent you from interfering other radios
that using the same channel.
Press the PTT button, if the channel is busy, the radio with BCL
function active will make warning sound and prohibit transmitting. To
stop the warning sound, please release the PTT button and the radio
returns to receiving mode.
It can be set as: short press : Busy Channel Lockout, long press
OFF.
1. Press the programmable key once, BCL none will be
shown,
2. Select the character you need with / , e.g.: BCL none
3 Press to confirm.
Key lock
Press the key programmed as key lock for one second to
lock/unlock the keys for the transceiver.
It can be set as: short press: key lock, long press OFF.
1. Press the programmable key once, CHANNEL will be shown,
2. Press it again, CHANNEL will be shown.
Squelch level Selector
Enter the Select squelch level rapidly, 0~9 levels are available
with the channel selector.
Call list
P
2
P
3
P
1