User's Manual

ManualsBrandsShenzhen Kirisun Communications ManualsElectronicsFM Handheld Transceiver

1.As shown:in CH1 ,press , Utilities is shown.

2.Press to enter select mode.

3.Press / , and VOX is shown.

4.Press to select OFF or ON .

5.Select ON or OFF with / ,press to confirm.

Set whisper

1.As shown:in CH1 ,press , Utilities is shown.

2.Press then Whisper is shown.

3.Press / to select the level of whisper,press to confirm.

Set Rptr/Talkarnd

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Rptr/Talkaround is shown,

3. Press to select the mode,

4. Select Repeater Mode or Talkaround mode with / ,press

to confirm.

Set speak on mode

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Speak Mode is shown,

3. Press to select the speak on mode,

4. Select with / , press to confirm.

Set zone mode

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Zone Edit is shown,

3. Press to select the zone mode,

4. Select Zone No with / , press to confirm.

(This function can only be programmed after

setting Valid in the channel programming)

Rx FRQ

401.660000

Ch alias

CHANNEL 1

Set call list

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Call is shown,

3. Press to select the call list ,

4. Select with / , press PTT to transmit.

Set Rx FRQ

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Ch Edit is shown,

3. Press to select

4. Press , is shown, enter the set of Rx FRQ,

5 Set the Rx FRQ value with the keypad,

6. Press to delete, and press to confirm.

Set Tx FRQ

1 As shown: in CH 1 , press to enter select mode,

2. Press / , and Ch Edit is shown,

3. Press to select

4. Press , is shown, enter the set of Tx FRQ,

5 Set the Tx FRQ value with the keypad,

6. Press to delete, and press to confirm.

Set Rx CTCSS/DCS

Note: the following setting including Rx FRQ, Tx FRQ,

CTCSS/DCS can only be programmed after setting Valid in the

channel programming

Ch alias

CHANNEL 1

Rx CTCSS

401.660000