User's Manual

9
8
5. Receive a Call
Release the PTT button to receive a call.
Your dealer can set CTCSS, DCS, 5 Tone,DTMF,2 Tone
signaling on your radio channels by PC software. If you select a
channel that has been preset with the tone signaling, you will not
hear any other calls except those from your own system.
4. Make a Call
To make a call, press PTT, and speak in normal
voice. Please keep your mouth 3~4 cm away from
the microphone.
6. Operation on menu:
press button to enter the menu or confirm any contents;
press button to return to the previous menu or cancel
the set. When entered the menu, select the sub-menu with the
channel selector , or .
The menu is as follows:
P
4
P
1
P
2
P
3
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Level: 0~9
HML
ON/OFF
Utilities
Scan
Back Light
Squelch Level
Power Level
Key tone Scrambler Save Companding
Rptr/Talkaround
Speak mode
Zone Edit
Call
Lone Work
Radio Infor
Fre Range
MCU Version
Whisper
Vox
Contact list
Status
Clone Mode
Wireless Clone Wire Clone
Ch Edit
Rx FRQ
Tx CTCSS
Tx FRQ
Rx CTCSS
Menu