User's Manual

SVC
P
I. Button
Return and delete button in the menu.
J. Button
Select Button.
K. Button
Select Button.
L. Button
Enter and Confirm Button.
M. Numeric keypad
N. Microphone/speaker jacks
For connecting microphone/speaker.
P
1
P
2
P
3
P
4
Explanation for the screen
Description
Signal intensity
SVC Lone Work
Compandor
Scrambler
channel lockout
Scanning
Key lockout
Keypad Tone is enable
Battery capacity
P
Icon
6
7
BASIC OPERATION
1.Switch On
Switch on the radio by turning the Power/Volume
switch clockwise till a click is heard, then the radio
will be in the state of stand by and you will hear a
beep if the dealer has set it.
2.Adjust Volume
Press the button preset as canceling squelch to
listen to the background noise and rotate the
Power/Volume switch to adjust volume.
3.Select Channels
Rotate the channel selector to select channels.
You will hear voice from the speaker while
receiving proper signals.
As shown in the above right figure:
Zone 1 is the zone of current channel (8
zones from 0 to 7).
H is the transmit power of the channel, H
stands for high power, M for middle
power while L for low power.
CHANNEL 1 is the current channel (128
channels from 1 to 128).
P