User's Manual Part 2

SPECIFICATIONS
PT6200
(2) 430~470 (4) 470~512
Frequency (MHz)
(1) 136~174
(3) 400~440 (5) 350~390
RF power 5W/1W 4W/1W
Spurious and harmonics -70dB
Frequency stability
2.5ppm
Maximum frequency deviation
5KHz(W)/ 2.5KHz(N)
Receiver sensitivity
0.25uV
Adjacent channel selectivity
70dB(W)/60dB(N)
Intermodulation reject ratio
65dB
Maximum AF output power
500mW
Number of channels 16
Battery Standard DC 7.2V
Dimension (W H D)
56mmx120mmx35mm
Weight
332g(With battery and antenna)
No.
PROBLEM SOLUTION
9 Technical Specifications
5
Communication
range is too short.
6
Unable to
transmit.
7
Noise is too loud.
Make sure the antenna is well
connected.
Make sure the antenna is the original
supplied one.
Check if the battery power is in the
normal state.
Ask your local dealer to adjust the
squelch level.
Make sure the PTT button has been
pressed completely.
Battery power may be insufficient.
Recharge or replace the battery pack.
Transmitting frequency has not been
set on the channel and the transceiver
has been remote killed.
Battery power may be insufficient.
Recharge or replace the battery pack.
Beyond the efficient communication
range.
2
5
26