User Manual

4
Item
Quantity
Antenna 1
Hand Strap 1
Li-Polymer Battery 1
Charger 1
Power Adapter 1
Dust Cover 1
Instruction Manual 1
天线 Antenna
电源适配器 Power Adapter
充电座 Charger
对讲机吊带 Hand Strap
锂电池 Li-Polymer Battery
■ Preparation
Charging the Battery 对电池充电
Plug the power adapter into the proper AC wall outlet; and insert the cable of the power adapter
into the adapter socket on the charger; then the charger indicator lights yellow.
Insert the battery or the radio to be charged into the charger slot.
Make sure the battery is in good contact with the charger terminals. When the red indicator lights,
the charger begins to charge the battery.
After charging for about 5 hours, the red indicator turns dim and the green indicator lights
indicating the battery has been fully charged.
Leave the battery in that sate of green indicator for 1~2 hours before you remove it from the
charger to achieve the best performance of the battery. Then you can disconnect the power adapter
from the AC outlet.
Notice:
* The battery is not fully charged in the factory, and please charge the new battery when you use
the radio for the first time.
* The radio is supplied with a KB-42A Li-Polymer battery manufactured by KIRISUN.
* When you charge the battery for the first time after purchasing or long storage, you should
repeat charging it several times to achieve the normal battery capacity.
* Do not recharge the battery if it has been fully charged or the battery power doesn’t become low,
otherwise it might affect the battery life or performance. Remove the battery from the charger
after charging.