User's Manual

2
8
2
9
»ù±¾²Ù×÷
°´Ë³Ê±Õë·½Ïòת¶¯µçÔ´/ÒôÁ¿¿ª¹Ø£¬´ò¿ª¶Ô½²»úµÄµçÔ´¡£
·¢³ö¡°àÖ¡±Òô£¬±íʾ¶Ô½²»ú´¦ÓÚ×¼±¸¹¤×÷״̬¡£
Switch on:
Switch on the transceiver by turning
the Power /Volume control clockwise
Till a click is heard, then the transceiver
will be in the state of stand by.
GETTING ACQUAINTED
Basic operation
LED INDICATOR
LED Lights red while
transmitting; lights
green while receiving
a signal; flashes red
when the battery
voltage is low while
transmitting.
CHANNEL SELECTOR
Rotate to select channel 1-16.
POWER /VOLUME SWITCH
Turn clockwise to switch ON the transceiver ;
To switch OFF the transceiver, turn
counterclockwise until a click sounds;
Rotate to adjust the volume level.
PTT (push-to -talk)
To make a call, press and hold the PTT button , then
speak into the microphone with normal voice.
Release the PTT to receive.
MONITOR BUTTON
Press the button for closing the SQUELCH, and
release for open.
MIC-SP JACKS
If desired, connect a speaker -microphone here.
Adjusting volume:
To adjust volume, turn the POWER
/VOL control, while using MONI to
listen to channel background noise.
Selecting channel :
Rotate the channel selector to select
channels.